The company has been adhering to the corporate tenet of "quality first, customer first", and sincerely welcomes domestic and foreign customers to visit and guide.
GET A QUOTEHigh Damping Rubber plays an important role in seismic isolation because it dissipates energy as it deforms. Unlike ordinary rubber compounds, which are generally formulated with different performance priorities, high damping rubber is developed to provide greater energy loss during repeated movement. In an isolation bearing, this property helps reduce the motion transmitted to the structure during an earthquake.
Zhejiang Earthquake Prevention Technology Co., Ltd. manufactures HDR bearings using high damping rubber laminated with steel plates and bonded through hot vulcanization. The resulting unit combines vertical load support, horizontal flexibility and energy dissipation in one bearing.
When an HDR bearing moves horizontally, its rubber layers deform under shear. During repeated loading and unloading, the relationship between force and displacement forms a hysteresis loop. The area enclosed by this loop represents the energy dissipated during one loading cycle.
A wider hysteresis loop indicates greater energy dissipation under the same test conditions. This behavior is an important part of how High Damping Rubber contributes to seismic isolation. Rather than relying only on the flexibility of the rubber, the bearing also converts part of the mechanical energy into heat during deformation.
The natural rubber base is compounded with additives to increase hysteretic damping. Zhejiang Earthquake Prevention's HDR bearings achieve an equivalent damping ratio of more than 12%. This property is considered alongside stiffness, deformation capacity and vertical load requirements when evaluating the bearing for a project.
An HDR bearing performs several functions within an isolation system. It supports the weight of the structure, accommodates horizontal movement and provides a restoring force that helps the structure return toward its original position after displacement.
The laminated construction combines rubber layers with internal steel plates. The steel plates help support vertical loads and restrict lateral bulging, while the rubber provides the flexibility needed for horizontal deformation. With High Damping Rubber, energy dissipation is also built into the bearing itself.
A separate damping device is not necessarily required when the selected HDR bearing provides the damping performance specified by the project. This can simplify the arrangement of components within an isolation layer, although the final system configuration still depends on structural calculations and project requirements.
Integrating damping into the bearing also places greater importance on the rubber compound and its performance under repeated deformation. Material properties, bearing dimensions and laminated construction all need to correspond to the intended application.
Seismic isolation bearings remain under sustained load during normal service, while also being exposed to temperature changes and environmental conditions. Their material properties therefore need to remain suitable throughout the intended service period.
HDR bearings from Zhejiang Earthquake Prevention are developed with attention to several factors:
These properties are relevant to the service performance of High Damping Rubber bearings. Project specifications and supporting test data should be reviewed when assessing their suitability for particular environmental and loading conditions.
Residual deformation is another factor considered in the evaluation of seismic isolation bearings. After repeated or large horizontal displacement, the bearing's remaining deformation can affect its position and subsequent performance.
HDR bearings are intended to provide energy dissipation while maintaining a restoring response. Their residual deformation characteristics are therefore relevant to post-earthquake assessment. After a significant seismic event, the isolation system should be inspected according to the applicable engineering requirements. The condition of the bearings and their connections needs to be evaluated before decisions about continued use or replacement are made.
For buildings such as hospitals, schools and office facilities, this post-event assessment is part of planning for structural safety and service continuity.

Zhejiang Earthquake Prevention Technology Co., Ltd. manufactures HDR bearings in compliance with EN 15129, the European standard for anti-seismic devices. The products are used in seismic isolation applications involving high-rise buildings, bridges and the retrofitting of existing structures.
Interest in seismic isolation in China increased following the 2008 Wenchuan earthquake, bringing greater attention to technologies that help reduce earthquake effects on buildings and infrastructure. HDR bearings are one option within this field, particularly where the project requires both horizontal flexibility and energy dissipation.
The company's technical development has benefited from cooperation with the Institute of Engineering Mechanics of the China Earthquake Administration. Established in 2016, Zhejiang Earthquake Prevention operates on a 10,800 m² site with a 6,000 m² standard factory building. Since September 2020, it has been a holding subsidiary of Hangzhou Diping Zhenan Technology Co., Ltd. and a member of the China Disaster Prevention Association.
HDR bearings are part of a broader range of seismic isolation solutions. Zhejiang Earthquake Prevention also manufactures LRB and LNR rubber bearings, elastic sliding bearings and friction pendulum isolation bearings. Each type has different structural characteristics and is selected according to the requirements of the isolation system.
When evaluating a High Damping Rubber bearing, engineers consider its equivalent damping ratio together with stiffness, deformation capacity, long-term material behavior and applicable standards. These factors help determine whether the bearing is suitable for the structural loads and movement conditions specified in a project.
By combining restoring force and energy dissipation within a laminated rubber unit, HDR bearings provide an integrated approach to seismic isolation.